Time prove that the LED light is the ideal lighting product for the modern society. Environment friendly, energy efficient, long life span, all these create a miracle in the lighting field. In the LED light world, there is one type which is more attractive than others. It is the LED string light which is famous of its flexible use and beautiful looking. But the normal question that user faces it the installation of this amazing LED string light. Here let’s find out how to install step by step.
1
Make sure the clips are large enough to accommodate the diameter of your LED string light before nailing them in; the rope's thickness depends on the brand and model.
2
Nail plastic cable clips half-way into to the installation area at regular intervals. You want to leave a little space to slide in the LED light rope before nailing in the clip all the way --- unless, of course, you purchase clips that still have space for the rope even after they are fully nailed in. If you want the rope to hang a bit, then leave a lot of space between each clip; if you want the LED rope lighting to be pulled tight, place the clips about 8 inches apart.
3
Hang the rope from the clips. Finish nailing in the clips, being carefully not to accidentally hit the LED light rope with your hammer.
4
Use electrical tape to cover parts of the LED string light that you do not want illuminated. This step is especially useful if you're snaking the rope up a wall to go behind a picture frame or piece of artwork; covering the exposed rope will allow for exclusive backlighting.
5
Plug in your LED light string to a standard electrical outlet. Check it is Ok and the installation work is finished. anty881209wong 140102
No comments:
Post a Comment